Experimental Fitting of Rotor Models by Using a Special Three-Node Beam Element
Journal of Computational and Nonlinear Dynamics, 13(2): 021009, DOI: 10.1115/1.4038148
Publications
Journal Papers
Optimum Selection of Variable Pitch for Chatter Suppression in Face Milling Operations
Materials, (12): 112 , 21 p. , DOI: https://doi.org/10.3390/ma12010112
Symmetry breaking in milling dynamics
International Journal of Machine Tools and Manufacture, 2019, 139:37-59., DOI: 10.1016/j.ijmachtools.2019.01.002
Microchaos in human postural balance: Sensory dead zones and sampled time-delayed feedback
Physical Review E, 2018, 98:022223, DOI: 10.1103/PhysRevE.98.022223
Stability of turning processes for periodic chip formation
Advances in Manufacturing, 6(3), pp 345-353, DOI: 10.1007/s40436-018-0229-6
Numerical methods for the stability of time-periodic hybrid time-delay systems with applications
Applied Mathematical Modeling, 2018, 57:142-162, DOI: 10.1016/j.apm.2017.12.029
Experimental investigation of dynamic chip formation in orthogonal cutting
International Journal of Machine Tools and Manufacture, 32.35625, DOI: 10.1016/j.ijmachtools.2019.103429
Closed-Form Estimations of the Bistable Region in Metal Cutting via the Method of Averaging
International Journal of Non-Linear Mechanics, 112:49-56, DOI: 10.1016/j.ijnonlinmec.2018.09.005
On stability of emulated turning processes in HIL environment
CIRP Annals, pp 405-408, DOI: https://doi.org/10.1016/j.cirp.2019.04.035
Stochastic Semi-Discretization for Linear Stochastic Delay Differential Equations
International Journal for Numerical Methods in Engineering, , DOI: https://doi.org/10.1002/nme.6076
Bifurcation analysis of nonlinear time-periodic time-delay systems via semidiscretization
International Journal for Numerical Methods in Engineering, 115(1):57-74, DOI: 10.1002/nme.5795
Stability analysis in milling by taking into account the influence of forced vibrations on the actual tool-workpiece engagement conditions
8th HPC 2018 – CIRP Conference on High Performance Cutting, 4p, DOI: 10.1016/j.procir.2018.08.276
Numerical and experimental investigation of the applicability of pellet impacts for impulse excitation
International Journal of Impact Engineering, 115, pp 19-31, DOI: 10.1016/j.ijimpeng.2018.01.006
Chatter avoidance in cutting highly flexible workpieces
CIRP Annals - Manufacturing Technology, 4 p, DOI: 10.1016/j.cirp.2017.04.054
Extension of process damping to milling with low radial immersion
International Journal of Advanced Manufacturing Technology, 89(9):2545-2556, DOI: 10.1007/s00170-016-9780-0
Prediction of robust stability boundaries for milling operations with extended multi-frequency solution and structured singular values
Journal of Manufacturing Processes, 9p, DOI: 10.1016/j.jmapro.2017.09.015
Effect of wavy tool path on the stability properties of milling by the implicit subspace iteration method
International Journal of Advanced Manufacturing Technology, 9p, DOI: 10.1007/s00170-016-9827-2
Optimal detuning of a parallel turning system – theory and experiments
Journal of Dynamic Systems, Measurement and Control, 139(1): 7p, DOI: 10.1115/1.4034497
Analytical estimations of limit cycle amplitude for delay-differential equations
Electronic Journal of Qualitative Theory of Differential Equations, Special Issue, 2016(77):1-10, DOI: 10.14232/ejqtde.2016.1.77
Chatter suppression techniques in metal cutting
CIRP Annals - Manufacturing Technology, 65(2):785:808, DOI: 10.1016/j.cirp.2016.06.004
Improving stability of multi-cutter turning with detuned dynamics
Machining Science and Technology, 20 (3): 440-459, DOI: 10.1080/10910344.2016.1191029
Spectral element method for stability analysis of milling processes with discontinuous time-periodicity
International Journal of Advanced Manufacturing Technology , 2017, 89(9):2503–2514, DOI: 10.1007/s00170-016-9044-z
Design of a self-tuneable mass damperfor modular fixturing systems
CIRP Annals - Manufacturing Technology, 65(1): 389-392, DOI: 10.1016/j.cirp.2016.04.112
Analytical expressions for chatter analysis in milling operations with one dominant mode
Journal of Sound and Vibration, 375:403-421, DOI: 10.1016/j.jsv.2016.04.015
On the Nonlinear Kinematic Oscillations of Railway Wheelsets
Journal of Computational and Nonlinear Dynamics, 11(5):051020-051020-10. CND-15-1436, DOI: 10.1115/1.4033034
Robust stability analysis of machining operations
The International Journal of Advanced Manufacturing Technology, 10p, DOI: 10.1007/s00170-016-8715-0
State-dependent distributed-delay model of orthogonal cutting
Nonlinear Dynamics, 84(3):1147-1156, DOI: 10.1007/s11071-015-2559-2
Exact stability chart of an elastic beam subjected to delayed feedback
Journal of Sound and Vibration, 367: 219-232, DOI: http://dx.doi.org/10.1016/j.jsv.2016.01.002
Multi-baker map as a model of digital PD control
International Journal of Bifurcation and chaos, No.26, Issue No. 02.,1650023, 11 pages, DOI: 10.1142/S0218127416500231
A pseudospectral tau approximation for time delay systems and its comparison with other weighted-residual-type methods
International Journal for Numerical Methods in Engineering, 108(6):588–613, DOI: 10.1002/nme.5225
Estimation of the bistable zone for machining operations for the case of a distributed cutting-force model
Journal of Computational and Nonlinear Dynamics, 11(5):051008, DOI: 10.1115/1.4032443
Extension of the spectral element method for stability analysis of time-periodic delay-differential equations with multiple and distributed delays
Communications in Nonlinear Science and Numerical Simulation, 35:177-189, DOI: 10.1016/j.cnsns.2015.11.007
Spectral properties of milling and machined surface
MATERIALS SCIENCE FORUM CIRP, 12th International Conference on High Speed Machining October 18-20, 2015, Nanjing, China, 836-837: pp. 570-577, DOI: 10.4028/www.scientific.net/MSF.836-837.570
Experimental validation of appropriate axial immersions for helical mills
International Journal of Advanced Manufacturing Technology , 84: (5) pp. 1295-1302, DOI: 10.1007/s00170-015-7748-0
Discontinuity-induced bifurcations of a dual-point contact ball
Nonlinear Dynamics, 83:685–702, DOI: 10.1007/s11071-015-2356-y
On the bistable zone of milling processes
Philosophical Trasactions of the Royal Society A, 373(2051) pp 17., DOI: 10.1098/rsta.2014.0409
On the effect of distributed regenerative delay on the stability lobe diagrams of milling processes
Periodica Polytechnica - Mechanical Engineering, 59(3):126-136, DOI: 10.3311/PPme.7995
Quantization improves stabilization of dynamical systems with delayed feedback
CHAOS, 2017, 27:114306, DOI: 10.1063/1.5006777
Ultimate capability of variable pitch milling cutters
CIRP ANNALS-MANUFACTURING TECHNOLOGY, 67(1): pp 373-376 (2018), DOI: 10.1016/j.cirp.2018.03.005
Operational stability prediction in milling based on impact tests
Mechanical Systems and Signal Processing, 21p, DOI: 10.1016/j.ymssp.2017.10.019
On the analysis of the double Hopf bifurcation in machining processes via center manifold reduction
Proceedings of the Royal Society A, 473(2207): 20170502, DOI: 10.1098/rspa.2017.0502
Algorithm for Robust Stability of Delayed Multi-Degree-of-Freedom Systems
Advances in Delays and Dynamics - Theory, Numerics, Applications, and Experiments, 7: 141-154, DOI: 10.1007/978-3-319-53426-8_10
Structural stability of a light rotating beam under combined loads
Acta Mechanica, 228 (2017) 3735-3740, DOI: 10.1007/s00707-017-1902-8
Effect of potential energy variation on the natural frequency of an Euler–Bernoulli cantilever beam under lateral force and compression
Journal of Applied Mechanics – Transactions of the ASME, 84 (2017) Paper no. 051002, 8p, DOI: 10.1115/1.4036094
Conference Papers and Abstracts
Stability of turning process with tool subjected to compression
8th HPC 2018 – CIRP Conference on High Performance Cutting, 4p, DOI: 10.1016/j.procir.2018.08.275
Measuring Modal Damping of a Multibody System with Dry Friction
24th International Congress on Sound and Vibration, London, UK, 2017, 7p, DOI:
Numerical and experimental investigation of contact length during orthogonal cutting
Materials Today: Proceedings, 6(13) pp 329-334, DOI: 10.1016/j.matpr.2019.03.131
Experimental Observations on Unsafe Zones in Milling Processes
Phil. Trans. R. Soc. A , pp 1-20, DOI: DOI 10.1098/rsta.2018.0125.
On process damping induced by vibration-dependency of cutting direction in milling
8th HPC 2018 – CIRP Conference on High Performance Cutting, 77:171-174, DOI: 10.1016/j.procir.2018.08.270
Milling stability for slowly varying parameters
Procedia CIRP, 77: pp 110-113, DOI: doi.org/10.1016/j.procir.2018.08.233Get
Gaussian noise process as cutting force model for turning
8th CIRP Conference on High Performance Cutting (HPC 2018), (77): 94-97, DOI: https://doi.org/10.1016/j.procir.2018.08.229
High-speed camera measurements in the mechanical analysis of machining
8th HPC 2018 – CIRP Conference on High Performance Cutting, 77, pp 155-158, DOI: 10.1016/j.procir.2018.08.264
Laser scanned patterns of machined surfaces
8th HPC 2018 – CIRP Conference on High Performance Cutting, 4p, DOI: 10.1016/j.procir.2018.09.034
Experimental investigation of the shear angle variation during orthogonal cutting
Materials Today: Proceedings, 5 (13), pp 26495-26500 , DOI: 10.1016/j.matpr.2018.08.105
Detailed contact surface evaluation based on electric field potentials
PROCEDIA CIRP (CIRP ICME ’16 - 10th CIRP Conference on Intelligent Computation in Manufacturing Engineering), 62 pp. 323-328. , 6 p. (2017), DOI: https://doi.org/10.1016/j.procir.2016.06.018
Approximation of Top Lyapunov Exponent of Stochastic Delayed Turning Model Using Fokker-Planck Approach
9th European Nonlinear Dynamics Conference, 2017, Budapest, Hungary, 5p, DOI:
Dynamics of cutting near double Hopf bifurcation
IUTAM Symposium on Nonlinear and Delayed Dynamics of Mechatronic Systems, 2016, Nanjing, China, 22:123-130, DOI: 10.1016/j.piutam.2017.08.016
Cutting Force Measurements in High Speed Milling - Extension of the Frequency Range of Kistler Dynamometer
39th MATADOR, 5p, DOI:
Stability and Vibration Amplitude of the Quasi Periodic Delayed Mathieu Equation with Frequency-Modulated Coefficients
9th European Nonlinear Dynamics Conference, 2017, Budapest, Hungary, 2p, DOI:
Position control as a source of machine tool chatter
7th International Conference on High Speed Machining, Xian, China, 7p, DOI:
Damping of in-process measuring system through variable stiffness tunable vibration absorber
ISMA2016: International Conference on Noise and Vibration, pp 3687:3698, DOI: -
Computation of the Lower Envelope of Stability Lobes
HSM: XIIIth International Conference on High Speed Machining. Fr. Metz, 1-4, DOI: -
Surface Error and Stability Chart of Beam-Type Workpiece in Milling Processes
ASME 2016 IDETC/CIEC (ASME Proceedings | 28th Conference on Mechanical Vibration and Noise), 7p, DOI: doi:10.1115/DETC2016-59940
Cumulative Surface Location Error for Milling Processes Based on Tool-tip Frequency Response Function
7th HPC 2016 – CIRP Conference on High Performance Cutting, 46: 323–326, DOI: 10.1016/j.procir.2016.04.015
Estimation of safe chatter-free technological parameter regions for machining operations
7th HPC 2016 – CIRP Conference on High Performance Cutting, 46:464-467, DOI: 10.1016/j.procir.2016.04.035
Robust Stability of Machining Operations in Case of Uncertain Frequency Response Functions
7th HPC 2016 – CIRP Conference on High Performance Cutting, 46:151-154, DOI: 10.1016/j.procir.2016.03.181
Marási folyamat stabilitása a szerszámélen megoszló állandó intenzitású forgácsoló erőrendszer esetén
XII. Magyar Mechanikai Konferencia, Miskolc, 2015, 7p, DOI: -
SZÁN SZABÁLYOZÁSÁNAK HATÁSA AZ ESZTERGÁLÁS REGENERATÍV REZGÉSEIRE
XII. Magyar Mechanikai Konferencia, Miskolc, 2015, 8p, DOI: -
Investigating multiscale phenomena in machining: the effect of cutting-force distribution along the tool’s rake face on process stability
ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, 14p, DOI: 10.1115/DETC2015-47165
The effect of non-symmetric FRF on machining: A case study
ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, 9p, DOI: doi:10.1115/DETC2015-47037
STATE-DEPENDENT, NON-SMOOTH MODEL OF CHATTER VIBRATIONS IN TURNING
ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, 8p, DOI: 10.1115/DETC2015-46748
Optimization of the robust stability limit for multi-cutter turning processes
ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, -, DOI: 10.1115/DETC2015-47484
Sensitivity of stability charts with respect to modal parameter uncertainties for turning operations
12th IFAC Workshop on Time Delay Systems, Ann Arbor, Michigan, USA, 2015, 6p, DOI: doi:10.1016/j.ifacol.2015.09.354
Regenerative delay, parametric forcing and machine tool chatter: A review
12th IFAC Workshop on Time Delay Systems, Ann Arbor, Michigan, USA, 2015, 4p, DOI: 10.1016/j.ifacol.2015.09.398
Modeling process damping via FEM based Force-FRF
4th International Conference on Virtual Machining Process Technology (VMPT 2015), Vancouver, Canada, 1-10p, DOI:
Tuneable mass dampers with variable stiffness for chatter suppression
4th International Conference on VMPT, 2015, Vancouver, Canada, pp. 20, DOI: -
Hardware-in-the-loop experiment of turning
8th HPC 2018 – CIRP Conference on High Performance Cutting, 4p, DOI: 10.1016/j.procir.2018.08.179
Ball shooting tests for identification of modal parameter variation in rotating main spindles
8th HPC 2018 – CIRP Conference on High Performance Cutting, 4p, DOI: 10.1016/j.procir.2018.08.179
The Development of High Speed Virtual Milling Test Paper
ASME 2017 Dynamic Systems and Control Conference , 10p, DOI: doi:10.1115/DSCC2017-5217
Robust controller design for turning operations based on measured frequency response functions
20th World Congress of the International Federation of Automatic Control (IFAC2017), 6p, DOI: 10.1016/j.ifacol.2017.08.1359
Experimental Determination of Dominant Multipliers in Milling Process by means of Homogeneous Coordinate Transformation
ASME 2017 IDETC/CIE, 8p, DOI: 10.1115/DETC2017-67827
A Theoretical Investigation of the Effect of the Stochasticity in the Material Properties on the Chatter Detection During Turning
ASME 2017 IDETC/CIE, 5p, DOI:
Quantification of uncertainty in machining operations based on probabilistic and robust approaches
8th HPC 2018 – CIRP Conference on High Performance Cutting, 4p, DOI: 10.1016/j.procir.2018.08.226
Building a test equipment for measuring chaotic behaviour in a frictional oscillator
9th European Nonlinear Dynamics Conference, 2017, Budapest, Hungary, 2p, DOI:
Cutting force measurement from acceleration sensor in milling operation
35th Danubia-Adria Symposium on Advances in Experimental Mechanics, Sinaia, Romania, 2018, 2p, DOI:
Numerical and experimental investigation of contact length during orthogonal cutting
35th Danubia-Adria Symposium on Advances in Experimental Mechanics, Sinaia, Romania, 2018, 2p, DOI:
Stochastic Semi-Discretization for Stochastic Systems With Delay
SIAM Conference on Applications of Dynamical Systems (DS19), , DOI:
Efficient cutting force characteristic measurement based on a single turn in milling operation
8th International Conference on Virtual Machining Process Tachnolog (VMPT, 2019), Vancouver, Canada, pp 1-2, DOI: https://www.nserc-canrimt.org/vmpt-2019/
Quantitative identification of chatter based on Floquet multipliers in milling operation
8th International Conference on Virtual Machining Process Tachnolog (VMPT, 2019), Vancouver, Canada, pp 1-2, DOI: https://www.nserc-canrimt.org/vmpt-2019/
Semidiscretization method for nonlinear time-periodic time-delay systems
IUTAM Symposium on Exploiting Nonlinear Dynamics for Engineering Systems, 2p, DOI: -
Finding periodic solutions in the dynamics of metal cutting via averaging
9th European Nonlinear Dynamics Conference, 2017, Budapest, Hungary, 2p, DOI: -
Effect of periodic chip formation on the stability of turning processes
9th European Nonlinear Dynamics Conference, 2017, Budapest, Hungary, 3p, DOI:
Nonlinear material modelling of an airsoft pellet applied for impulse excitation
9th European Nonlinear Dynamics Conference, 2017, Budapest, Hungary, 2p, DOI:
Bifurcations in implicit map - application to Surface Location Error in milling processes
9th European Nonlinear Dynamics Conference, 2017, Budapest, Hungary, 2p, DOI:
Effect of white noise on the stability of linear, delayed, continuous PD control system
The 16th National Conference on National Vibration and The 13th Conference on Nonlinear Dynamics and Stability, 1p, DOI:
Efficient Computation of the Robust Stability Limit for Cutting operations
1st Sino-German Forum on Manufacturing, 0p, DOI:
Double Hopf bifurcation in orthogonal cutting processes
IUTAM Symposium on Nonlinear and Delayed Dynamics of Mechatronic Systems, 2016, Nanjing, China, 2p, DOI: -
ELECTRICAL RESISTANCE-BASED MECHANICAL CONTACT MEASUREMENT FOR METALLIC PARTS
33nd Danubia-Adria Symposium on Advances in Experimental Mechanics, Portorož, Slovenia, 2016, ISBN: 978-961-94081-0-0 p. 184-185, DOI:
Evaluation of mechanical contact between metallic surfaces
International Congress of Theoretical and Applied Mechanics. Montreal, Canada, Paper TS.FS03-1.04. pp. 1-2, DOI:
Higher-order estimation of limit cycle amplitude in metal cutting
24th International Congress of Theoretical and Applied Mechanics, 2016, Montréal, Canada, 2p, DOI: -
Robust stability analysis of milling processes
24th International Congress of Theoretical and Applied Mechanics, 2016, Montréal, Canada, 2p, DOI: -
Numerical Investigation of Dynamic Contact and Energy Dissipation at the Tool Holder-Spindle Interface
6th International Conference on Nonlinear Vibrations, Localization and Energy Transfer, pp. 1-2, DOI:
Oscillations of railway wheelsets with discontinuous model of the contact forces
6th International Conference on Nonlinear Vibrations, Localization and Energy Transfer July 4-8, 2016 - Liege, Belgium, 1-2, DOI:
Chatter identification by spectral properties of machined surfaces
32nd International Danubia-Adria Symposium on Advances in Experimental Mechanics. Magas-Tátra, Szlovákia, 2015.09.22-2015.09.25., 1pp, DOI:
Computational aspects of the finite element simulation of chip formation
XIII. COMPLAS, Barcelona, Spain, , DOI:
Nemszimmetrikus frekvenciaátviteli mátrix hatása a megmunkálás stabilitására
XII. Magyar Mechanikai Konferencia, Miskolc, 2015, 1p, DOI: -
MODELLEZÉSI LEHETOSÉGEK FORGÁCSOLÁSI FOLYAMATOK VÉGESELEMES SZIMULÁCIÓJÁBAN
XII. Magyar Mechanikai Konferencia, Miskolc, 2015, , DOI:
Példák a követő módszer alkalmazására szakaszosan sima mechanikai rendszerek esetén
XII. Magyar Mechanikai Konferencia, Miskolc, 2015, ISBN:978-615-5216-73-2, p. 19 , DOI:
R-adaptív módszer alkalmazása az izogeometrikus analízisben
XII. Magyar Mechanikai Konferencia, Miskolc, 2015, ISBN:978-615-5216-73-2, p. 17, DOI:
Symmetry-breaking due to Coulomb friction
ECCOMAS Thematic Conference on Multibody Dynamics, Barcelona, Spain, ISBN: 978-84-944244-0-3, a89, pp. 1-2, DOI:
Configurational-Force-Based R-Adaptive Mesh Refinement for Isogeometric Analysis
IGA 2015 III. International Conference on Isogeometric Analysis, Trondheim, Norway, ISBN:978-84-943928-5-6, p. 1, DOI:
Sliding dynamics on codimension-2 discontinuity surfaces
?, Open problems in nonsmooth dynamics, 1-4, DOI:
The Effect of Slowly Varying Dynamics on Milling Stability
UTIS Conference, Antalya, pp 1-10, DOI: -
Effect of Unstable Quasiperiodic Orbits on Heavy-duty Milling Operation
SIAM, , DOI:
MEASURING STABILITY OF MILLING PROCESS
DAS, pp 1-2, DOI:
Investigation of the performance of the two-layer viscoplastic model applied for simulating airsoft ball impacts
XIV. International Conference on Computational Plasticity, 2017, Barcelona, Spain, 1p, DOI:
Experimental investigation of the shear angle variation during orthogonal cutting
34th Danubia-Adria Symposium on Advances in Experimental Mechanics, Trieste, Italy, 2017, 2p, DOI:
Application of an electric contact sensor in machining
35th Danubia-Adria Symposium on Advances in Experimental Mechanics, Sinaia, Romania, 2018, 2p, DOI: